Dongye Made Alu Case Yej Electromagnetic Braking Three-Phase Motor

YEJ2 series electromagnetic-brake motors are improved products on the base of YEJ series. The technical properties of its motor conform to the requirements of Y2 series. The performances of the brake assembly are improved.

YEJ2 can make action promptly when the power of electric motor is off. Quick brake time doesn't exceed 0.15 second for frame sizes 63MM up to 90MM and not exceed 0.2 second for frame sizes 100MM up to 160MM. This series can acquire slow brake time by changing the connection in the terminal box as per customer's request.
This series have low noise and the braking performance is reliable. The working principle: The electromagnetic-brake motors acquire 198V directcurrent rectified from 220V AC when the power is on. At the same time, the armature is attracted by electromagnet. This makes brake disc ratable and enables motor to run freely. When the power is off, the electromagnet loses electromagnetic force. The armature is pushed by the spring and sticks to endshield of the motor immediately, the rotation is stopped therefor.
This series are widely used in machine tools, packaging machinery, woodworker machinery, food processing machinery, chemical engineering machinery, textile machinery, construction machinery, gear reducer and so on.

Conditions: Motors of this series can continuously run at the rated power under the following conditions:
Altitude: Ablve sea level, not exceeding 1000m.
Ambient temperature: It varies with seasons but not exceeding +40.

Voltage, Frequency and duty
Frequency: 50Hz, 60Hz
Rated Voltage: 220V/380V, 380V/660V
Connection: Y-connection for 3kW and below whereas delta-connection for 4kW and above.
Duty: Continuous(S1)
Insulation class: B, F
Protection: IP44, IP54 or IP55
NOTES: Imported bearing and locked bearing at D-end on requst.

We have more than 30years on all kinds of ac motors and gearmotor ,worm reducers producing ,nice price 
What we do:
1.Stamping of lamination
2.Rotor die-casting
3.Winding and inserting - both manual and semi-automatically
4.Vacuum varnishing
5.Machining shaft, housing, end shields, etc…
6.Rotor balancing
7.Painting - both wet paint and powder coating
8.assembly
9.Packing
10.Inspecting spare parts every processing
11.100% test after each process and final test before packing.,
 

Q: Do you offer OEM service?
A: Yes
Q: What is your payment term?
A: 30% T/T in advance, 70% balance when receiving B/L copy. Or irrevocable L/C.
Q: What is your lead time?
A: About 30 days after receiving deposit or original L/C.
Q: What certifiicates do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc.